Arizona Permit Test: Signals & Pavement Markings Practice Questions

Correct answer: Turn right after a full stop when traffic and pedestrians are clear

Where signs don't prohibit it, you may turn right on red after a complete stop once vehicle and pedestrian traffic is clear.

Source: Section 3: Roadway and Vehicle Knowledge – Signal Lights

Correct answer: Come to a safe stop

Steady yellow warns the light is about to turn red; if you haven't entered, stop safely. Speeding up to beat the light is illegal.

Source: Section 3: Roadway and Vehicle Knowledge – Signal Lights

Correct answer: The same as a STOP sign

A flashing red light means the same as a stop sign: stop completely, then proceed when the roadway is clear.

Source: Section 3: Roadway and Vehicle Knowledge – Signal Lights

Correct answer: Slow down and proceed with caution

A flashing yellow light means slow down and proceed carefully if the roadway is clear.

Source: Section 3: Roadway and Vehicle Knowledge – Signal Lights

Correct answer: Do not turn that way until a green signal appears

A red arrow means you may not turn in that direction; stop and wait for the green signal.

Source: Section 3: Roadway and Vehicle Knowledge – Signal Lights

Correct answer: Turn with caution after yielding to oncoming traffic and pedestrians

A flashing yellow arrow allows the turn only after yielding to any oncoming vehicle or pedestrian.

Source: Section 3: Roadway and Vehicle Knowledge – Signal Lights

Correct answer: Continue the turn and clear the intersection

If you're already in the intersection when the yellow arrow appears, continue your turn and clear it safely.

Source: Section 3: Roadway and Vehicle Knowledge – Signal Lights

Correct answer: The police officer

You must obey signal lights unless a police officer directs you to do otherwise.

Source: Section 3: Roadway and Vehicle Knowledge – Signal Lights

Correct answer: Traffic flows in both directions

Yellow center lines mean two-way traffic; white lines separate lanes going the same direction.

Source: Section 3: Roadway and Vehicle Knowledge – Pavement Markings

Correct answer: No, you may not pass

Passing is allowed only from the side with the broken line; if the solid yellow line is on your side, you may not pass.

Source: Section 3: Roadway and Vehicle Knowledge – Pavement Markings

Correct answer: To turn left

Double solid yellow lines prohibit passing in either direction; you may cross them only to turn left.

Source: Section 3: Roadway and Vehicle Knowledge – Pavement Markings

Correct answer: Crossing it is prohibited

A double solid white line separates lanes going the same direction, and crossing it is prohibited.

Source: Section 3: Roadway and Vehicle Knowledge – Pavement Markings

Correct answer: Turn in the direction of the arrow

In a lane marked with a curved arrow and ONLY, you must turn in the arrow's direction; a curved-and-straight arrow lets you turn or go straight.

Source: Section 3: Roadway and Vehicle Knowledge – Pavement Markings

Correct answer: Stop only to pick up or drop off passengers

White curb: stop only long enough to pick up or drop off passengers. Yellow: load or unload and stay with the car. Red: no stopping, standing or parking.

Source: Section 3: Roadway and Vehicle Knowledge – Pavement Markings

Correct answer: Stop only to load or unload, and stay with your car

At a yellow curb you may stop only long enough to load or unload, and you must stay with your car.

Source: Section 3: Roadway and Vehicle Knowledge – Pavement Markings